Products

Preventol® BIT 20 D is a biocide used in industrial additives applications.

MATTING AGENT MT-909 is made of acrylic resin and catalyst etc.

Baeropan® MC 90249 KA/3 is a Ca/Zn Solid Stabilizer.

WANNATE® H1210 is a kind of monomeric cycloaliphatic diisocyanate which is colorless or light yellow liquid with low viscosity.

Elevast™ D20 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

ExCal® 100 is processed from a high purity ore and used in plastics, rubber, coatings, adhesives, sealants, mastics, and other specialty applications where color, binder demand and economics are of importance.

3M™ Boron Nitride Cooling Filler Platelets 001 is engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications – including thermal interface materials (TIM), consumer electronics and automotive applications.

CEAMPECTIN LMA 6410 is a low ester amidated pectin with high reactivity with calcium extracted from selected high quality citrus peel and standardized to obtain an uniform performance.

Licocene® PO 462 granules TP is a propylene-Ethylene-Copolymer Wax modified with Polyethylene Wax.

AP 5608 is a low viscosity modified Cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. The coating made from AP 5608 has very high gloss.

Caspol™ 5003 is a 100% solids castor oil based reactive diluent with a linear chain backbone having a low viscosity, good compatibility and wetting. Caspol™ 5003, a linear chain diol, is composed of a blend of primary and secondary hydroxyls which makes this polyol more reactive yielding slightly harder and less flexible components than either Caspol™ 5001 or DBTM Oil.

AEROSIL® R 972 W Coating is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). The product thickening efficiency of AEROSIL® R 972 W Coating ex RHE is consistent with the Waterford-produced AEROSIL® R 972. This profile is different than the thickening profile of standard RHE quality.

Milled Hurd 30 fiber is the perfect starting point to connect “eco” with industry. Milled Hurd 30 hurd fibers are ideal for absorbent applications and biocomposites. Our hurd fiber products are sustainably sourced, rapidly renewable, and expected to be free from dust and foreign materials.