Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM15142
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Features and Benefits
Features
- Excellent adhesion to smooth surfaced nickel-plated steel
- Excellent chemical resistance to KOH electrolyte
- Very low electrical resistance
- Reliable spray application properties
- Water based coating
Benefits
- Maintains a conductive surface on battery current collectors and optimal performance of the battery
- Reduces corrosion and oxidation of nickel-plated steel
- Improves the electrical contact between the cathodecan and electrolyte
- Maximal production output for low operating and component costs
- Low VOC emissions that assist environmental compliance
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Processing Information
Surface Preparation
- Ensure the substrate is clean, dry, and free from dust.
Mixing/Dilution/Blending
- Do not dilute. BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) is supplied ready-to-use. Before using, stir the product thoroughly or use a slow-speed propeller to mix until the product is of uniform color and there is no settling. Do not use a paint shaker or high-shear mixer as this could cause air entrapment.
Application
- Use standard airless production spray equipment. For small areas, use a suction cup gun. Production runs are best handled with propeller-agitated pressure pot systems.A dry coating weight of 10-20 mg per can is recommended for optimum electrical properties.
Cure Schedule
- BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) should be air-flashed for 1-2 minutes at room temperature.
- Final cure times: 3 minutes at 300°F (150°C) or 1 minute at 400°F (204°C), or 30 seconds at 450°F (232°C).
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
Shelf life for this product is 12 months from date of qualification under original seal. Prolonged storage of BONDERITE® L-GP EB 020A ACHESON (known as DAG EB-020A) at temperatures higher than 50°C (120° F) is not recommended. Do not allow to freeze. Empty containers may retain hazardous properties. Follow all MSDS/label warnings even after container is empty
Other
- Application Temperature
- 150.0 °C
- Boiling Point (SDS)
- 100.0 °C
- Color (SDS)
- Dark grey
- Density
- 1.12-1.16 kg/L
- Flash Point
- 212.0 °F
- Group Principal Number
- S000218
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Item Number
- Miscible in (SDS)
- Water
- Odor (SDS)
- Mild alcohol
- Principal
- Shelf Life
- 12.0 mo
- Solid Content
- 36.0-38.0 %
- Specific Gravity (SDS)
- 1.14
- USA/DOT Proper Shipping Name
- Not Applicable
- USA/DOT UN Number
- Not Applicable
- Viscosity
- 500.0-1000.0 mPa.s
- Viscosity (SDS)
- 500.0-1000.0 mPa.s
- Volatile Organic Compounds (VOC)
- 81.0 g/L
- pH
- 9.5-9.8
- pH (SDS)
- 9.5-9.8
- Chemical Properties
Value Units Test Method / Conditions pH 9.5-9.8 - Wet Basis - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 1.12-1.16 kg/L kg/L Flash Point 212.0 °F °F Viscosity 500.0-1000.0 mPa.s mPa.s wet product - Material Composition
Value Units Test Method / Conditions Solid Content 36.0-38.0 % % by weight, wet product Volatile Organic Compounds (VOC) 81.0 g/L g/L wet product - Application Information
Value Units Test Method / Conditions Application Temperature 150.0 °C °C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Specific Gravity (SDS) 1.14 - Viscosity (SDS) 500.0-1000.0 mPa.s mPa.s pH (SDS) 9.5-9.8 -