ELVACE® 735

ELVACE® 735 is a low VOC product used in packaging adhesives and waterborne adhesives. It functions as a binder and resin in CASE ingredients and as a resin in plastics and elastomers.

Principal: HB Fuller

Chemical Family: Ethylene Vinyl Acetate (EVA)

End Uses: Glue, Packaging Adhesive, Waterborne Adhesive

Additives Included: Plasticizer (Unspecified)

Features: Excellent Adhesion, General Purpose, Good Adhesion Property, Good Hydrolysis Resistance, Good Toughness, High Hydrolysis Resistance, Increases Viscosity, Low Grit Content, Low VOC, Plasticizer Migration Resistance, Poor Borax Tolerance, Short Bond Development Time

Safety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Additives Included
Plasticizer (Unspecified)
Blend
Yes
Chemical Family
Ethylene Vinyl Acetate (EVA)
Country of Origin
United States of America (USA)
Function
Binder, Resin
Product Code
MITM04754
Product Functions
Binder,
Resin
Single Ingredient
No
Technologies
CASE,
Plastics
Product Families
CASE — Resins & Binders
Other Resins & Binders
Plastics — Basic Thermoplastics
Vinyl Polymers

Features & Benefits

Labeling Claims
Alkylphenol Ethoxylate (APEO)-free,
Conflict Minerals-free,
Low VOC,
Per & Polyfluoroalkyl Substances (PFAS)-free
Product Features
Excellent Adhesion,
General Purpose,
Good Adhesion Property,
Good Hydrolysis Resistance,
Good Toughness,
High Hydrolysis Resistance,
Increases Viscosity,
Low Grit Content,
Low VOC,
Plasticizer Migration Resistance,
Poor Borax Tolerance,
Short Bond Development Time
Key Features
  • Tough permanently flexible polymer films
  • Excellent viscosity build with plasticizer addition
  • Superior adhesion to packaging film and foil
  • Poor borax tolerance
  • Excellent resistance to plasticizer migration
  • Short bond development times
  • Greater resistance to hydrolysis when compared to polyvinyl acetate homopolymer
  • Residual vinyl acetate monomer (VAM) level less than 0.1%
  • Recommended for microwave packaging adhesive formulas
  • Low grit content for extrusion applications

Applications & Uses

Product End Uses
Glue,
Packaging Adhesive,
Waterborne Adhesive
Markets
Adhesives & Sealants,
Paints & Coatings
Applications
Adhesives & Sealants — DIY & Consumer
Other Consumer Applications
Paints & Coatings — Specialty Coatings
Other Specialty Coatings
Product Applications

Designed as a base for general purpose or specialty adhesives requiring a low VOC

Properties

Physical Form
Liquid

Regulatory & Compliance

Compliance (Regulatory)
FDA 21 CFR 175.105,
FDA 21 CFR 176.170,
FDA 21 CFR 176.180

Packaging & Availability

Packaging Type
Bulk,
Drums,
Totes (IBC)

Principal Information

Group Principal Number
S000091
Principal
HB Fuller

Storage & Handling

Storage Conditions

Protect from freezing. Ideal storage temperature is 72°F. Stability at 72°F is >180 days.

Other

Flammable Nature (SDS)
Not classified as a flammability hazard
Item Number
ITM07420,
ITM07443,
ITM07458
Processing & Application Methods
Extrusion
Protect from Freezing
Yes
Temperature Control
Yes
USA/DOT UN Number
Not Applicable
Chemical Properties
ValueUnitsTest Method / Conditions
pH4.0-5.5-
Material Composition
ValueUnitsTest Method / Conditions
Non-Volatile Contentmin. 54.5%
Physical Properties
ValueUnitsTest Method / Conditions
Density8.7-9.0lb/gal
Glass Transition Temperature (Tg)6.0°CDifferential Scanning Calorimetry Inflection
Glass Transition Temperature (Tg)0.0°CDifferential Scanning Calorimetry onset
Storage Temperaturemin. 40.0°F
Viscosity1900.0-2800.0cPsBrookfield Viscometer at 25°C, 20 rpm, spindle #3
Viscosity1900.0-2800.0cPsRotational Viscometer at 25°C, 20 rpm, spindle #3
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Boiling Point (SDS)212.0°F
Density (SDS)8.7-9.0lb/gal
Melting Point (SDS)32.0°F
Solid Content (SDS)min. 54.5%(W/W)
Viscosity (SDS)1900.0-2800.0cPs
Volatile Organic Compounds (VOC) (SDS)0.1%(W/W)
pH (SDS)4.0-5.5-
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life180.0d