Products

Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.

BONDERITE® S-FN 330 ACHESON offers clean, dry, long lasting, solvent resistant lubrication for sliding, rubbing or rolling surfaces. BONDERITE® S-FN 330 ACHESON is a resin-bonded PTFE lubricant supplied as one component in ready-for-use form. Its low temperature cure of 50°C (300°F) does not affect heat-sensitive substrates such as light metals, wood, rubber and some plastics. The extremely thin coating of BONDERITE® S-FN 330 ACHESON necessary to achieve maximum lubrication (from 0.0003 to 0.0007 inch, or 0.008 to 0.018 millimeter) allows post-treatment of parts while maintaining original part dimensions without redesign. In many cases, BONDERITE® S-FN 330 ACHESON coating can replace metal plating or finishing and offers improved performance at lower cost.

BONDERITE® S-FN 8301 is designed for lubricant applications where environmental regulations restrict emissions of VOC (Volatile Organic Compounds). BONDERITE® S-FN 8301 provides good wear, low coefficient of friction, solvent resistance, and resistance to chalking in UV exposure. After dip or spray application, BONDERITE® S-FN 8301 can be either air dried or forced dried with heat. This superior coating material offers lifetime lubrication for heat-sensitive substrates, complex machined precision steel parts, light metals (copper, aluminum), and some non-metallic materials.

BONDERITE® S-FN 309 ACHESON (known as EMRALON 309) is a concentrated dispersion of PTFE fluorocarbon resin in an isopropyl alcohol carrier. BONDERITE® S-FN 309 ACHESON is designed to provide a fast-drying, low-friction coating when diluted or compounded as a lubricant. It provides good adhesion to many substrates including: wood, metal, rubber, plastic and glass. Moving parts wear longer, work harder and need less maintenance when coated with this product. As a “friction modifier” additive, it is conducive to most aerosol or coating formulations and can be applied by virtually all types of application methods.

BONDERITE® S-FN 334 is one of a series of Acheson resin bonded lubricant coatings designed to provide dry film lubrication and release properties in a variety of industrial and consumer applications. BONDERITE® S-FN 334 consists of a fluoropolymer lubricant dispersed in an organic resin and solvent system. Its superior physical properties, 260°C service temperature capabilities, and excellent salt spray resistance make it particularly suitable for the lubricant coating of automotive components. This coating’s low coefficients of static and dynamic friction offer significant advantages for carburetor parts, where elimination of stick-slip motion is a major factor in achieving good fuel economy.

BONDERITE® S-FN T-502 is a combination of specialty processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. In its cured form, it exhibits both high and low temperature flexibility and moisture resistance. These benefits, when coupled with ease of application and long shelf life, make the product adaptable to a wide variety of uses. This product may also be mixed with other Dag® products to provide a wide resistance range.

BONDERITE® S-FN 109B is one of a series of coatings designed to provide controlled electrical properties. BONDERITE® S-FN 109B is a dispersion of finely divided graphite in a thermoplastic resin. This product rapidly air dries to form a flexible conductive coating. It is designed to be applied by typical spray or printing techniques. The flexibility of this product makes it an excellent choice for coating plastic as well as metal. BONDERITE® S-FN 109B is tested for 11 elemental impurities. The high purity level of BONDERITE® S-FN 109B makes for a highly conductive, flexible coating.

BONDERITE® S-FN 213 ACHESON is designed to provide controlled electrical resistance properties. BONDERITE® S-FN 213 ACHESON is a dispersion of finely divided graphite pigment in an epoxy resin solution. When properly cured, it has excellent adhesion to epoxy circuit boards, bushings, plastics and ceramics. BONDERITE® S-FN 213 ACHESON also has excellent wearing properties. It provides chemical resistance to oils and many solvents, but not to enamel strippers. BONDERITE® S-FN 213 ACHESON as a lubricant coating provides clean, dry, long-wearing, and superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of BONDERITE® S-FN 213 ACHESON keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure. Formulated from processed micro-graphite and epoxy resin, BONDERITE® S-FN 213 ACHESON forms tightly adherent coatings on many types of substrates. In addition to high lubricity, BONDERITE® S-FN 213 ACHESON coatings exhibit extremely good wear resistance to oils and solvents (except enamel strippers).

Dynasylan® 1146 diaminofunctional silane may be used in coatings, adhesives, and sealants to improve the adhesion of amino­reactive resins. These are resins such as silicones (RTV), two­part urethanes, silylated urethanes, MS polymers, and two­part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly­distributed linear and cyclic oligosiloxanes and fullfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by- product (VOC) and has a correspondingly low odor level during application.

Dynasylan® MTMO is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. The dual nature of its reactivity allows Dynasylan® MTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent, surface modifier or reactive reagent. Dynasylan® MTMO is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

BONDERITE® S-OT 310B is one of a series of Henkel resin-bonded lubricant coatings formulated to provide dry film lubrication in a variety of industrial and consumer applications. BONDERITE® S-OT 310B is a two-package product which should be combined with BONDERITE® L-GP T A COMP ACHESON (for properties: see Product data sheet of this product). When mixed, it is a dispersion of fluorocarbon in a thermosetting binder, designed to be applied by spray. It produces a low friction coating free of stick-slip characteristics. The product is recommended for metal and rubber substrates. For wood and plastics specially designed types of BONDERITE® exist.

BONDERITE® S-FN TM-001A is one of a series of Henkel resin-bonded coatings designed to provide dry film lubrication and release in a variety of industrial and consumer applications. A flexible, water- based coating specially designed for flexible substrates, BONDERITE® S-FN TM-001A is a resin-bonded PTFE lubricant that prevents binding, seizing, sticking, and tearing of rubber and plastic parts during production and assembly. BONDERITE® S-FN TM-001A provides a clean dry film that protects substrates from oil, alcohol, gasoline, some inorganic acids, abrasive substances, dirt, and contaminants for longer wear life and reduced maintenance. BONDERITE® S-FN TM-001A is an ideal low-friction coating for substrates where operational flexibility is a major consideration. BONDERITE S-FN TM-001A (known as EMRALON TM-001A) can easily be tinted with a variety of color pigments for easy identification of parts.

BONDERITE® S-FN GP 1904 is a dispersion of PTFE and graphite in a thermosetting binder designed to be applied by spray, brush, or dip. BONDERITE® S-FN GP 1904 produces a low friction coating with excellent resistance to corrosion and solvents. The wide range of cure temperatures 149 to 260°C allows BONDERITE® S-FN GP 1904 to be used on wood, rubber and many plastics and on engineering metals. BONDERITE® S-FN GP 1904 is a one-package product and is not affected by low temperature storage conditions.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.