Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Plastics & Elastomers Functions
- Product Code
- MITM16490
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Materials Features
- Product Features
- High softening point
- Good solubility and compatibility
- Pale color
- Good color retention
- Good pigment wetting
- High gloss
- Imparts high viscosities
Applications & Uses
- Coating End Applications
- Ink & Toner End Applications
- Plastics & Elastomers End Uses
- Markets
- Applications
- Usage Information
- Letterpress, offset, and gravure-type printing inks.
- Varnishes that require faster bodying, higher viscosities, and faster film drying.
- Toners for printers and copiers.
- Rubbers, tires.
Properties
- Physical Form
Principal Information
- Group Principal Number
- S002297
- Principal
Storage & Handling
- Storage Information
- DERTOLINE® MP is store under cover and at temperature below 30°C. About 12 months.
- Since DERTOLINE® MP is sensible to gradual oxidation and to compaction, a strict inventory control must be observed (oldest material used first), especially during hot
- periods.
- This could affect some properties of the resin.
Other
- ADR/RID/ADN UN Number
- Not Available
- Color (SDS)
- Yellowish
- Explosive Nature (SDS)
- Non explosive
- IATA/ICAO UN Number
- Not Available
- IMO/IMDG UN Number
- Not Available
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Hot molten product: may burn if ignited, Fine particles and powder may cause skin irritation by mechanical abrasion. However, based on available data, the classification criteria are not met, Fine particles and powder may cause eye irritation by mechanical abrasion. However, based on available data, the classification criteria are not met, Inhalation (dust or vapours/fumes generated by heated products) may cause respiratory irritation with throat discomfort, coughing or breathing difficulty, Resin dusts may ignite on contact with electrostatic discharge or exposure to flames or other sources of ignition, Hot molten product: Burns may cause irreversible eye injury and blindness. Causes skin burns
- Oxidizing Properties (SDS)
- Non-oxidising
- Protect from Freezing
- Yes
- USA/DOT UN Number
- Not Available
- Optical Properties
Value Units Test Method / Conditions Color Scale 7.0 Gardner Gardner 50 red/ 50 tolerance Refractive Index 1.54 - at 20°C - Chemical Properties
Value Units Test Method / Conditions Acid Number 8.0 mg KOH/g mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 1.11 kg/L kg/L At 25°C Softening Point 140.0 °C °C Ring and Ball Test Storage Temperature 41.0-86.0 °F °F - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) min. 300.0 °C °C Differential Scanning Calorimetry Flash Point (SDS) min. 200.0 °C °C Regulation (EC) No. 440/2008, Annex, A.9 Flash Point (SDS) min. 200.0 °C °C Closed Cup Softening Point (SDS) 135.0-145.0 °C °C ASTM E28 Softening Point (SDS) 135.0-145.0 °C °C Ring and Ball Test Specific Gravity (SDS) 1.0 - Pycnometer at 20°C Specific Gravity (SDS) 1.0 - Regulation (EC) No. 440/2008, Annex, A.3 at 20°C