UCECOAT® 7210

UCECOAT® 7210 is characterized by:

• White appearance
• High solids content
• Good colloidal stability
• Low viscosity

UV/EB cured formulations based on UCECOAT® 7210 are characterized by the following performance properties:

• Flexibility
• Direct adhesion onto common plastic substrates.

The actual properties of UV cured formulations also depend on the selection of other formulation components such as additives and photoinitiators.

Formulated UV/EB curable products containing UCECOAT® 7210 are typically applied by spray, spin coating, dip coating, curtain coating and common roll-to- roll coating processes. Additional methods may also be used.

UCECOAT® 7210 is recommended for use in energy cured protective hardcoats for:

• Consumer electronics (casing & display)
• Optical film
• Metallized plastics

• Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.