Products

Dynasylan® 1175 is a cationic polymeric aminofunctional silane possessing hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® 1175 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 1175 is a dark yellow to brown liquid. Dynasylan® 1175 contains 40% active ingredient and about 60% of methanol. Dynasylan® 1175 is miscible with water, with hydrolysis occurring.

BONDERITE® L-GP 2412 is a concentrated graphite lubricant and coating material specially formulated for demanding high temperature applications up to 900°F (482°C). High heat resistance plus the very low residue left by the fluid component make BONDERITE® L-GP 2412 ACHESON (known as DAG 2412) ideal for such applications as gasket coatings, foundry maintenance operations, and brazing and welding stop-off coatings. Gaskets seal effectively and release easily when pretreated with BONDERITE L-GP 2412 ACHESON (known as DAG 2412).

BONDERITE® S-FN 329 ACHESON is a fast-drying, resin bonded, fluorocarbon dry film lubricant capable of coating wood, metal, rubber, plastic, and glass substrates. It is designed for low-friction, light load, repetitive stresses. Moving parts wear longer, work harder, and need less maintenance when coated with this product. BONDERITE® S-FN 329 ACHESON cures at room temperature, allowing application where conventional sintered PTFE coatings cannot be considered. The coefficient of friction (static) when the coating is properly applied ranges from 0.06 to 0.09. A coating thickness of 0.0002 to 0.0007 inches (0.0051 to 0.0178 millimeters) generally provides the optimum low friction properties. BONDERITE® S-FN 329 ACHESON is a liquid concentrate that can be diluted according to need. Although Emralon® products are not specifically designed as protective coatings, they do offer moderate resistance to chemicals.

BONDERITE® L-FM M 20A ACHESON is a unique, water based, molybdenum disulfide billet coating designed for use when cold extruding ferrous metals. It forms an excellent lubricating film over zinc and manganese phosphated substrates. BONDERITE L-FM M 20A ACHESON adheres extremely well in mechanical feed mechanisms and moves with the billet surface during deformation, enabling higher production rates and extreme area reductions. It also eliminates the expense and housekeeping problems associated with tumble-applied MoS2 powder.

BONDERITE® S-FN M 254N is one of a series of Henkel’s Acheson resin- bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. BONDERITE® S-FN M 254N is a synergistic combination of MoS2 and other lubricants dispersed in an epoxy resin solution. BONDERITE® S-FN M 254N can be applied by standard brush, dip-spin, or spray techniques. BONDERITE® S-FN M 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. BONDERITE® S-FN M 254N provides an effective performance, even as a very thin film (0.0003 inch or 8 microns), thus there is little interference with operating tolerances.

BONDERITE® S-FN GP 1904 is a dispersion of PTFE and graphite in a thermosetting binder designed to be applied by spray, brush, or dip. BONDERITE® S-FN GP 1904 produces a low friction coating with excellent resistance to corrosion and solvents. The wide range of cure temperatures 149 to 260°C allows BONDERITE® S-FN GP 1904 to be used on wood, rubber and many plastics and on engineering metals. BONDERITE® S-FN GP 1904 is a one-package product and is not affected by low temperature storage conditions.

BONDERITE® S-FN 333 is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings. Its low coefficient of friction, hardness, adhesion, resiliency, and cure conditions allow application of BONDERITE® S-FN 333 in a multitude of places where pure sintered PTFE coatings are unsuitable. Coatings of BONDERITE® S-FN 333 wear longer than pure PTFE, offer superior chemical resistance, and can be repaired without removing the existing coating. BONDERITE® S-FN 333 combines the toughness of the support resin with the surface properties of pure PTFE.

BONDERITE® S-FN 330 ACHESON offers clean, dry, long lasting, solvent resistant lubrication for sliding, rubbing or rolling surfaces. BONDERITE® S-FN 330 ACHESON is a resin-bonded PTFE lubricant supplied as one component in ready-for-use form. Its low temperature cure of 50°C (300°F) does not affect heat-sensitive substrates such as light metals, wood, rubber and some plastics. The extremely thin coating of BONDERITE® S-FN 330 ACHESON necessary to achieve maximum lubrication (from 0.0003 to 0.0007 inch, or 0.008 to 0.018 millimeter) allows post-treatment of parts while maintaining original part dimensions without redesign. In many cases, BONDERITE® S-FN 330 ACHESON coating can replace metal plating or finishing and offers improved performance at lower cost.

BONDERITE® S-OT 310B is one of a series of Henkel resin-bonded lubricant coatings formulated to provide dry film lubrication in a variety of industrial and consumer applications. BONDERITE® S-OT 310B is a two-package product which should be combined with BONDERITE® L-GP T A COMP ACHESON (for properties: see Product data sheet of this product). When mixed, it is a dispersion of fluorocarbon in a thermosetting binder, designed to be applied by spray. It produces a low friction coating free of stick-slip characteristics. The product is recommended for metal and rubber substrates. For wood and plastics specially designed types of BONDERITE® exist.

BONDERITE® S-FN 334 is one of a series of Acheson resin bonded lubricant coatings designed to provide dry film lubrication and release properties in a variety of industrial and consumer applications. BONDERITE® S-FN 334 consists of a fluoropolymer lubricant dispersed in an organic resin and solvent system. Its superior physical properties, 260°C service temperature capabilities, and excellent salt spray resistance make it particularly suitable for the lubricant coating of automotive components. This coating’s low coefficients of static and dynamic friction offer significant advantages for carburetor parts, where elimination of stick-slip motion is a major factor in achieving good fuel economy.

BONDERITE® L-FG EB-012 is a conductive coating product in liquid form. It is designed for applications requiring conductive properties.

BONDERITE® L-FG LS 2127 is a water-based carrier product. It is used in brazed fabrications, drilling applications, and welds, and is compatible with non-ferrous alloys. The product offers several key features, including anti-adhesion and anti-stick properties, excellent mold release, high temperature performance, increased die and mold life, and non-reactivity, making it suitable for enhancing performance in various industrial applications.

BONDERITE® S-FN 8301 is designed for lubricant applications where environmental regulations restrict emissions of VOC (Volatile Organic Compounds). BONDERITE® S-FN 8301 provides good wear, low coefficient of friction, solvent resistance, and resistance to chalking in UV exposure. After dip or spray application, BONDERITE® S-FN 8301 can be either air dried or forced dried with heat. This superior coating material offers lifetime lubrication for heat-sensitive substrates, complex machined precision steel parts, light metals (copper, aluminum), and some non-metallic materials.

BONDERITE® S-FN T-502 is a combination of specialty processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. In its cured form, it exhibits both high and low temperature flexibility and moisture resistance. These benefits, when coupled with ease of application and long shelf life, make the product adaptable to a wide variety of uses. This product may also be mixed with other Dag® products to provide a wide resistance range.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.